Track Systems

Choose from 6 different Mounting Systems

Chain or Beam Type Mount
1

Works well when attached to a support member immediately above the top of the curtain.

 

Threaded Rod Type Mount

Works well when the attachment points are substantially higher than the top of the curtain.

2

Ceiling Type Mounting

Mounts directly to ceiling or any flat horizontal surface – must be directly above the curtain.

3

Wall Type Mounting

Mounts directly to any vertical surface.

4

Beam or Truss Mounting

Attaches directly to I Beams or roof trusses. The clamps are secured with set screws and rotate for proper orientation.

5

Free Standing or Permanent Floor Mount and Columns Permits erection of curtains in any area. Base and tube assembly may be used with curved or right angle corners.

 

 

Where do I start?

Step 1
Please identify the exact area you wish to enclose with industrial Curtains.

Step 2
Figure the required height of the vinyl curtains. Should there be more than one height dimension – calculate the linear feet of each dimension separately, if possible.

Step 3
Figure the total linear feet required taking into account curved sections and please add approximately 10% for gathering or desired overlap.

Step 4
Review the available mounting systems, please keep in mind there should be a support member for every five feet of track, closer together if possible for insulated Curtains.

Step 5
Identify which mounting system will work best for your physical situation.

Should you encounter difficulty with any of these specifications, please call us – we will be glad to help you.

 

Track Systems

Spec Sheets