Ceiling Mounting System

1. Ceiling Mount Connector: These are placed wherever two tracks meet each other. The tracks should be slid into the bracket and meet in the center. The connector brackets should hold both tracks in place firmly. The screws at the side of the bracket can be loosened to allow the tracks to be slid in place and then tightened again.

2. Ceiling Mount Split Support: These are placed at the ends of your track, or at curves in your track. These allow one piece of track to be slid into their bracket. These pieces will support one piece of track, but will not allow for connection on another track piece.

3. Trolleys: Trolleys should be slid into the track before at least one of the end stops.

4. Adjustable end stop: These are to be placed at both ends of the track, to stop trollys from sliding out. Be sure to put all trolleys in the track before you put both end stops in.